EP600 Subwoofer problem
|
Joined: Jan 2006
Posts: 139
veteran
|
OP
veteran
Joined: Jan 2006
Posts: 139 |
Hi!
My EP600 Subwoofer has suddenly stopped working. When I turn it on, the red light at the back turns on, but does not turn green. And of course the LFE signals are not being processed. I have owned this EP600 for about 3 years. Any suggestions?
4 M80s/VP150/EP600/Denon AVR-5308 & DVD-2910/ 2 QSC SRA3622(1100wattsX2)/Carvin 1800HD(600wattsX2)
|
|
|
Re: EP600 Subwoofer problem
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Jan 2006
Posts: 139
veteran
|
OP
veteran
Joined: Jan 2006
Posts: 139 |
Already emailed Axiom. Waiting for response. Thanks.
4 M80s/VP150/EP600/Denon AVR-5308 & DVD-2910/ 2 QSC SRA3622(1100wattsX2)/Carvin 1800HD(600wattsX2)
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Jan 2004
Posts: 13,841 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,841 Likes: 13 |
You would be better calling them, the techs Alan, Brent, JC, etc. man the phones into the evening. Email will be slower.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Aug 2009
Posts: 57
buff
|
buff
Joined: Aug 2009
Posts: 57 |
Ritchie,
Just to make sure that you don't have anything plugged into the trigger jack. If you have a cable plugged into the trigger jack and it is not giving voltage the light will be red and the sub won't work. Once 12v or there abouts is applied to the trigger cable then light will go green and sub will work.
This only applies if you have a cable plugged into the trigger jack. If you don't then red probably indicates a problem.
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Jan 2006
Posts: 139
veteran
|
OP
veteran
Joined: Jan 2006
Posts: 139 |
I spoke with Axiom tech support. They recommended changing the fuse. I bought new fuses from Radio Shack. No joy! The EP600 is still dead.
rvrrat: I unplugged the trigger cable, in case that was an issue. But the subwoofer is still dead. :-(
4 M80s/VP150/EP600/Denon AVR-5308 & DVD-2910/ 2 QSC SRA3622(1100wattsX2)/Carvin 1800HD(600wattsX2)
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Jan 2006
Posts: 139
veteran
|
OP
veteran
Joined: Jan 2006
Posts: 139 |
I bought the EP600 four years ago. So it is still under warranty. I will talk to tech support again tomorrow.
4 M80s/VP150/EP600/Denon AVR-5308 & DVD-2910/ 2 QSC SRA3622(1100wattsX2)/Carvin 1800HD(600wattsX2)
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Apr 2007
Posts: 4,877
connoisseur
|
connoisseur
Joined: Apr 2007
Posts: 4,877 |
let us know what you find out.
Sounds like you need a new amp?
-David
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Jan 2002
Posts: 3,270
connoisseur
|
connoisseur
Joined: Jan 2002
Posts: 3,270 |
Hi Richie,
Does your EP600 amp have a switch with "Flat" and other bass-boost settings (Half, Full) as well settings called "Load" and "Remote?."
If so, check it and make sure the switch is NOT at the Load or "Remote" settings. The subwoofer will not work if the switch is at "Load". Make sure the switch is at Flat and hasn't been accidentally moved to a different setting.
Regards,
Alan Lofft, Axiom Resident Expert (Retired)
|
|
|
Re: EP600 Subwoofer problem
|
Joined: Jan 2004
Posts: 13,841 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,841 Likes: 13 |
good point Alan, Flat (large rooms), full, or half are the active options.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Forums16
Topics24,947
Posts442,495
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
715
guests, and
1
robot. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|