Can I do this? AT screen
|
Joined: May 2006
Posts: 172
veteran
|
OP
veteran
Joined: May 2006
Posts: 172 |
I have already decided to purchase an electric acoustically transparent screen. This would drop down in front of the center channel and plasma screen in our den. Now, I have two options. Go with a 92" screen that would come down and sit just above the left and right channel. Keep in mind this would make the screen higher than advised. Or a 103" screen that would come down in front of the left and right channel. The catch with the 103" is that the bottom velvet border and batten would be 1.8" which would block a part of the speaker/speakers. Other than using an AT screen will I notice a big difference when I'm blocking small portion of speaker like that? Should I play it safe and still with a 92"? The screen comes highly recommended: http://seymourav.com
HG Cherry M80's, QS8's, VP150, and a pair of EP500's
|
|
|
Re: Can I do this? AT screen
|
Joined: Sep 2004
Posts: 11,458
shareholder in the making
|
shareholder in the making
Joined: Sep 2004
Posts: 11,458 |
I don't think it would be a huge deal, though which driver is blocked will make more or less of a difference. I'd much rather block a woofer than a tweeter...as a matter of fact, I probably wouldn't hesitate for a moment to block woofer, and wouldn't do it at all if it's right in line with a tweeter. For the midranges, I'd probably try to get it between drivers.
I think it would be easy to build a low platform to raise the speakers 1" ~ 7" just to make sure a critical driver isn't blocked....
::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
|
|
|
Re: Can I do this? AT screen
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
Funny, they are in Ames, Iowa and I've never heard of them. Which drivers would be blocked by the larger screen?
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: Can I do this? AT screen
|
Joined: May 2006
Posts: 172
veteran
|
OP
veteran
Joined: May 2006
Posts: 172 |
I haven't measured where the ideal height would be for the screen. But I envision it that the 1.8" would fall in between the 2 drivers, or in between the top woofer and bottom driver.
Last edited by jbsengineer; 03/29/10 06:26 PM.
HG Cherry M80's, QS8's, VP150, and a pair of EP500's
|
|
|
Re: Can I do this? AT screen
|
Joined: Oct 2006
Posts: 6,955
axiomite
|
axiomite
Joined: Oct 2006
Posts: 6,955 |
While I have read some arguments on both sides of their theories on a few things like horizontal center channels, I was impressed with this screen company in that they do not try to claim that their screens have zero effect on sound produced from speakers behind the veil as many AT screen manufacturers will lead you to believe. They actually speak to the effects on levels and the effects it has on different frequency ranges.
I'm still not sure I want an AT screen but if I did, I might be impressed enough with their openness to buy from them.
to quote from their web sight... The qualitative effects of having a fabric in front of your speakers is that you will notice that brighter recordings are tamed down a little, with a slight loss of sparkle and air, because the attenuation is higher in the top octave. While the average attenuation of the Center Stage XD screen fabric is 1.5 dB from 8k-20kHz, adding the black backing will increase this attenuation around one more decibel.
Of course, "sparkle" and "Air" are very open to interpretation but since they are describing what they admit to being mildly 'lost' as opposed to 'magically created....', I can forgive them.
With great power comes Awesome irresponsibility.
|
|
|
Re: Can I do this? AT screen
|
Joined: May 2006
Posts: 172
veteran
|
OP
veteran
Joined: May 2006
Posts: 172 |
While I have read some arguments on both sides of their theories on a few things like horizontal center channels, I was impressed with this screen company in that they do not try to claim that their screens have zero effect on sound produced from speakers behind the veil as many AT screen manufacturers will lead you to believe. They actually speak to the effects on levels and the effects it has on different frequency ranges.
I'm still not sure I want an AT screen but if I did, I might be impressed enough with their openness to buy from them.
to quote from their web sight... The qualitative effects of having a fabric in front of your speakers is that you will notice that brighter recordings are tamed down a little, with a slight loss of sparkle and air, because the attenuation is higher in the top octave. While the average attenuation of the Center Stage XD screen fabric is 1.5 dB from 8k-20kHz, adding the black backing will increase this attenuation around one more decibel.
Of course, "sparkle" and "Air" are very open to interpretation but since they are describing what they admit to being mildly 'lost' as opposed to 'magically created....', I can forgive them. I was also impressed by there 30 day full refund return policy. Even the custom orders can be returned.
HG Cherry M80's, QS8's, VP150, and a pair of EP500's
|
|
|
Forums16
Topics24,945
Posts442,484
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
2 members (Hambrabi, rrlev),
438
guests, and
4
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|