You are not logged in. [Log In]


Forums » General Discussion » Home Theater » Equipment Cabinet

Topic Options
Rate This Topic
#305285 - 05/07/10 02:24 PM Equipment Cabinet
David_G Offline
regular

Registered: 05/25/06
Posts: 9
Looking for a cabinet for all my gear. Something along the lines of the StudioTech U-22T. The trouble is, the VP150 is 27.5" wide and there is very little I've found that has a center drawer/cabinet that wide.

Any one have a model they like?

Top
#305286 - 05/07/10 02:33 PM Re: Equipment Cabinet [Re: David_G]
oldskoolboarder Offline
connoisseur

Registered: 05/25/03
Posts: 2181
Loc: Menlo Park, CA
Pricey and older style but I ended up w/ a Salamander Synergy because of the same problem. You can also get a riser to put a display above the VP150.

Top
#305288 - 05/07/10 02:39 PM Re: Equipment Cabinet [Re: oldskoolboarder]
tomtuttle Offline
axiomite

Registered: 06/20/03
Posts: 8488
Loc: Tacoma
Or just get a VP100. \:\)
_________________________
bibere usque ad hilaritatem

Top
#305289 - 05/07/10 02:43 PM Re: Equipment Cabinet [Re: oldskoolboarder]
David_G Offline
regular

Registered: 05/25/06
Posts: 9
Thanks. I found this unit from BDI.
http://www.bdiusa.com/theater/avion_2_8929.shtml

It's rough going as I have the VP150 to fit in a center slot and the Yamaha RX-Z11 to fit in one side.

The Z11 is 17.125" x 8.25" x 19.675” (W x H x D).
The VP150 is 27.5" x 7.5" x 7.5" (W x H x D).

Top
#305290 - 05/07/10 02:46 PM Re: Equipment Cabinet [Re: David_G]
David_G Offline
regular

Registered: 05/25/06
Posts: 9
How did you pull off the 27.5" center? The Synergy says each hole is only 19.75" wide.

Top
#305292 - 05/07/10 02:47 PM Re: Equipment Cabinet [Re: David_G]
David_G Offline
regular

Registered: 05/25/06
Posts: 9
Tom, how could I downgrade?!? Plus the VP150 is paid for!

Top
#305372 - 05/07/10 08:46 PM Re: Equipment Cabinet [Re: David_G]
Nashvegas Rocks Offline
old hand

Registered: 04/13/10
Posts: 92
Loc: Nashville TN
This was a problem for me as well, i looked for a couple weeks before finding a cheaper one than anticipating. I had a budget of up to about 800 or so and only spent 400. It has a floating mount so i was able to raise it above the center and the shelves had enough clearance for air to move around the receiver. if your curious it was from 399sofastore.com and don't knock the name cause they were the only ones in Nashville who had what i needed.


edit for link

http://www.399sofastore.com/haviencrbysa.html


Edited by Nashvegas Rocks (05/07/10 08:47 PM)
_________________________
M22's
VP100
QS4's
SVS PB12-NSD
Denon 2310CI
Panasonic P58S2
Panasonic P50S2

Top
#305431 - 05/08/10 03:16 AM Re: Equipment Cabinet [Re: Nashvegas Rocks]
jakewash Offline
shareholder in the making

Registered: 12/26/03
Posts: 10415
Loc: Calgary, Alberta
I have seen a few stands that the VP150 will fit into while looking through here I just can't remember which models.
_________________________
Jason
-----------------
TTTHHHPPPPPTTTT!

My HT

Top
#305964 - 05/11/10 09:13 AM Re: Equipment Cabinet [Re: jakewash]
DanielBMe Offline
devotee

Registered: 02/08/07
Posts: 422
Loc: Toronto - ON
If you are looking for a cabinet that will fit the vp150, this is the one I have. It fits the 150 perfectly. You can also click the Lineart button near the top right to see the dimensions of the insides.

http://www.techcraft.net/4105/detail.asp?product_id=1636&category_id=284

Price was $500 and it is well made.


Edited by DanielBMe (05/11/10 09:15 AM)

Top

Moderator:  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 
Forum Stats

15,233 Registered Members
15 Forums
24,007 Topics
424,186 Posts

Most users ever online:
883 @ 03/04/17 05:06 PM

Top Posters
Ken.C 18044
pmbuko 16437
SirQuack 13571
CV 11677
MarkSJohnson 11437
0 registered ()
14 Guests and
4 Spiders online.
Key: Admin, Global Mod, Mod
Newsletter Signup