Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Plasma Height Wall Install
#313904 07/09/10 07:22 PM
Joined: Sep 2008
Posts: 612
aficionado
OP Offline
aficionado
Joined: Sep 2008
Posts: 612
Still leaning heavily toward installing the 58" plasma on the wall so that I can place the future vp180 on mopads on top of the glass HT table (where the tv currently sits) rather than on speaker stands. What do people feel about how high the plasma should be placed on the wall, e.g., eye level = bottom 1/3 of screen as per THX, or higher?


"If you try to turn toward it, you go against it."
Re: Plasma Height Wall Install
SatKartr #313906 07/09/10 07:29 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
I just placed mine where it felt best (staring at a 50" piece of cardboard for a few days while waiting for the TV to arrive). I didn't even know of the THX recommendation, but yeah, my eyes are about level with the 1/3 up from the bottom of the screen.

I also have the TV tilted down a few degrees, that also seemed to help.


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: Plasma Height Wall Install
ClubNeon #313907 07/09/10 07:31 PM
Joined: Aug 2009
Posts: 6,015
axiomite
Offline
axiomite
Joined: Aug 2009
Posts: 6,015
Same here. Eye level with about bottom of 1/3 or middle, depending on where you're sitting.

Re: Plasma Height Wall Install
CatBrat #313910 07/09/10 08:47 PM
Joined: Sep 2008
Posts: 612
aficionado
OP Offline
aficionado
Joined: Sep 2008
Posts: 612
OK thanks guys, that seems to feel right to me as well.


"If you try to turn toward it, you go against it."
Re: Plasma Height Wall Install
SatKartr #313912 07/09/10 09:14 PM
Joined: Aug 2009
Posts: 93
J
old hand
Offline
old hand
J
Joined: Aug 2009
Posts: 93
I guess I am the odd man out. I have my plasma mounted so the the very bottom of the screen is at eye level when seated. I like it a bit higher than normal because I have recliners and I wear progressive lens glasses. When I am kicked back watching a movie, having the screen higher puts it in the sweet spot for my glasses. cool

Re: Plasma Height Wall Install
Joebob #313913 07/09/10 09:29 PM
Joined: Jun 2006
Posts: 532
Jc Offline
aficionado
Offline
aficionado
Joined: Jun 2006
Posts: 532
Hi jollo,

Have you slightly tilted down your plasma screen to approach the optimal viewing angle ?


jc
Re: Plasma Height Wall Install
Jc #313923 07/09/10 11:41 PM
Joined: Aug 2009
Posts: 93
J
old hand
Offline
old hand
J
Joined: Aug 2009
Posts: 93
Hello JC. I do have a tilting wall mount and it is tilted down slightly. The plasma is not real high on the wall, I just wanted it a little higher than normal because for me, it is a little more comfortable to look up and I wanted to leave room for the VP180 that I would like to get. grin

Re: Plasma Height Wall Install
Joebob #313926 07/10/10 12:19 AM
Joined: Mar 2010
Posts: 104
veteran
Offline
veteran
Joined: Mar 2010
Posts: 104
You're not the only one Jollo. The tweets on my M80's and the vp180 are exactly ear level, which happens to be eye level fro me??? I mounted my plasma a little higher, so a cc would not block the screen. Ear/eye level in my recliner is 36", and the bottom of the screen is 44" off the ground. Not much of a pitch, but much higher than others are speaking of. It is perfect no matter what position I sit in. I would not mount one above a fireplace, or 6-7' off the ground, but I see no harm in going higher than 1/3 bottom of screen at eye level. I would recommend using a cardboard template to stare at for a while to see how comfortable you will be when mounted.




M80's,VP180,QS8's,Epik Empire X 2
Integra 50.1,3 Emotiva UPA-1's,Antimode 8033
Re: Plasma Height Wall Install
Pitbull24 #315117 07/17/10 12:51 AM
Joined: Sep 2008
Posts: 612
aficionado
OP Offline
aficionado
Joined: Sep 2008
Posts: 612
Looking at my setup it seems you're right, when the vp180 comes the bottom of the plasma if wallmounted will be at or just below eye level.

To me it seems like that placement will still be fairly watchable and a better solution than a stand or wall mounting the vp180.

Or I could buy a different HT table that could accommodate the vp180 and plasma TV both.

Too many decisions, I think wallmounting the plasma up a bit high is what I want.


"If you try to turn toward it, you go against it."
Re: Plasma Height Wall Install
SatKartr #315133 07/17/10 03:01 AM
Joined: Feb 2004
Posts: 2,854
R
connoisseur
Offline
connoisseur
R
Joined: Feb 2004
Posts: 2,854
I have my 58" mounted such that the bottom of the TV is about 10"-12" above my feet when I kick back and put up my recliner footer. Let's me see the TV without having my feet distract me.

Wasn't a very scientific approach, but it sure was pragmatic.

The 46" in the great room is higher, hanging above a fireplace (much higher than the 58"). We're about 10-12 feet from the 46" when we watch TV. Never had a problem with it or felt it was too high.

Both TVs are on tilting wall mounts.

Throw all of the above into a blender and the answer is - don't over-think it. Use a tilting wall mount for angle improvement to taste and be sure you don't hang it to LOW. You don't want distractions or blockages interfering with the bottom of the screen. Once it's up, you'll get used to it wherever you put it. Final words - hit studs and make it level.

Last edited by Ray3; 07/17/10 03:02 AM.
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,357
Posts431,532
Members15,414
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,437
SirQuack 13,680
CV 11,791
MarkSJohnson 11,445
Who's Online Now
4 members (BBIBH, Mojo, michael_d, Kodiak), 209 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4