Previous Thread
Next Thread
Print Thread
Rating: 5
Page 16 of 116 1 2 14 15 16 17 18 115 116
Re: AxiomAir
Andrew #413329 07/08/15 08:57 PM
Joined: Dec 2001
Posts: 334
Likes: 5
Axiom Engineer
devotee
Offline
Axiom Engineer
devotee
Joined: Dec 2001
Posts: 334
Likes: 5
Originally Posted By Andrew
Originally Posted By Mojo
I might buy one of those pre-amp modules if it has the right I/O. Please let us know what the I/O is when available.


Think of it as just another "component" that you plug into your existing system like a Tuner/CD/DVD/BluRay/etc. It has a power button on the front with an indicator led, and around back there is a pair of left/right RCAs, a power jack for connecting a small "wall wart" power supply, two USB jacks for USB drives, and an Ethernet port. Volume control and source switching are handled by your existing pre-amp/receiver/processor/integrated amp. Inside are the same low noise power supplies, high resolution DAC, and Raspberry Pi2B as the AxiomAir portable.

Thanks,

Andrew


I should clarify the Ethernet jack...the pre-amp module still has WiFi capability, but because this is a component that will sit on your equipment stand, you might wish to use an available LAN connection instead.

Re: AxiomAir
MMM #413330 07/08/15 09:26 PM
Joined: Mar 2001
Posts: 1,387
Likes: 8
Ian Offline OP
President
connoisseur
OP Offline
President
connoisseur
Joined: Mar 2001
Posts: 1,387
Likes: 8
Hi Matt,

Let me clarify this for you. The price on Kickstarter now is USD $497. That works out to CDN $633.55 at today’s exchange rate. If you paid the USD $475 amount it works out to CDN $605.50. Since we are including the sales tax that makes it CDN $535.84 in Ontario and CDN $576.67 in Alberta. Kickstarter will charge your credit card on July 12.

Once Kickstarter ends we will continue to offer pre-purchase discounts on the AxiomAir that increase each week until we are at USD $799 around mid-September. The lowest we would likely start would be USD $517. and CDN $605. This would make the tax included price CDN $683.65 in Ontario and CDN $635.25 in Alberta. This means that it was still worthwhile to have purchased on Kickstarter no matter your location.

Ian


Ian Colquhoun
President & Chief Engineer
Re: AxiomAir
jmone #413332 07/08/15 09:52 PM
Joined: Jan 2006
Posts: 353
devotee
Offline
devotee
Joined: Jan 2006
Posts: 353
Andrew - just a bump on these questions prior to the closing:

Originally Posted By jmone

Thanks Andrew - Sounds good. Final couple of Q's:
- If I group the AxiomAirs will they then appear as one DLNA/UPnP device on the network and handle in sync playback between themselves?
- If I group the AxiomAirs will they then appear as one Airplay device on the network and handle in sync playback between themselves?
- Is there a Line Level or headphone out (so I can occasionally feed a PA system from one of the AA)
- I understand the Airplay quality limits, but do you support 24/192 bit over DLNA/UPnP ?

Thanks
Nathan


HT:M80,VP150,QS8,EP500 Outside:4xM3 Office:AudioBytes, Rumpus: M60,VP150,M22 Portable:2 x Airs
Re: AxiomAir
Andrew #413336 07/08/15 11:37 PM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Originally Posted By Andrew
Originally Posted By Andrew
Originally Posted By Mojo
I might buy one of those pre-amp modules if it has the right I/O. Please let us know what the I/O is when available.


Think of it as just another "component" that you plug into your existing system like a Tuner/CD/DVD/BluRay/etc. It has a power button on the front with an indicator led, and around back there is a pair of left/right RCAs, a power jack for connecting a small "wall wart" power supply, two USB jacks for USB drives, and an Ethernet port. Volume control and source switching are handled by your existing pre-amp/receiver/processor/integrated amp. Inside are the same low noise power supplies, high resolution DAC, and Raspberry Pi2B as the AxiomAir portable.

Thanks,

Andrew


I should clarify the Ethernet jack...the pre-amp module still has WiFi capability, but because this is a component that will sit on your equipment stand, you might wish to use an available LAN connection instead.


How about getting rid of the power switch and one USB port and giving us a subwoofer out instead? I know the light is important to Mark :-).


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: AxiomAir
Ian #413337 07/08/15 11:42 PM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Matt, you will be very sorry if we all have one and you don't.

When we all say things like "Oh whoa! This AA is so awesome. And its sub out is so smooth and TIGHT!", you won't have a clue what we're talking about.

You'll be so left behind because our AAs will be totally portable and your LFRs won't be.


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: AxiomAir
MarkSJohnson #413338 07/08/15 11:47 PM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Originally Posted By MarkSJohnson

Mojo, you get credit for the sub-out!

::High-Fives MoJo!::


Thanks, Mark. I never did get high fives for the EP800 :-).

By the way, are you missing thumbs on both hands?


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: AxiomAir
Ian #413342 07/09/15 01:20 AM
Joined: May 2002
Posts: 1,177
connoisseur
Offline
connoisseur
Joined: May 2002
Posts: 1,177
Quote:
Volume control and source switching are handled by your existing pre-amp/receiver/processor/integrated amp


On the pre-amp only, you will still be able to control the volume from the smart phone app, correct?

+1 for the sub out.


Shawn

Epic 80/600 + M3's + M3 Algonquins + M2 Computer + EP125
I think I'm developing an addiction.
Re: AxiomAir
jmone #413352 07/09/15 01:56 PM
Joined: Dec 2001
Posts: 334
Likes: 5
Axiom Engineer
devotee
Offline
Axiom Engineer
devotee
Joined: Dec 2001
Posts: 334
Likes: 5
Hi Nathan,

- If I group the AxiomAirs will they then appear as one DLNA/UPnP device on the network and handle in sync playback between themselves?

I'm waiting on an answer from our programmer to confirm this, but I believe that it will work as you have described.

- If I group the AxiomAirs will they then appear as one Airplay device on the network and handle in sync playback between themselves?

An AirPlay stream cannot be broadcast to other AxiomAirs. We'd love to include this capability, but Apple forbids it.

- Is there a Line Level or headphone out (so I can occasionally feed a PA system from one of the AA)

No, just a summed-mono subwoofer line level output.

- I understand the Airplay quality limits, but do you support 24/192 bit over DLNA/UPnP ?

24/192 works fine over UPnP. I have tesed this both from Android devices using BubbleUPnP and from a PC running Foobar.

Thanks,

Andrew

Re: AxiomAir
Mojo #413353 07/09/15 02:00 PM
Joined: Dec 2001
Posts: 334
Likes: 5
Axiom Engineer
devotee
Offline
Axiom Engineer
devotee
Joined: Dec 2001
Posts: 334
Likes: 5
Originally Posted By Mojo
How about getting rid of the power switch and one USB port and giving us a subwoofer out instead? I know the light is important to Mark :-).


Hi Mojo,

A subwoofer output on the pre-amp module would not work. If we offered one the volume level of your sub would not change when you changed the volume on your pre-amp/processor/receiver. I would just drive the sub from either line level outputs of speaker outputs on your system.

Thanks,

Andrew

Re: AxiomAir
real80sman #413354 07/09/15 02:01 PM
Joined: Dec 2001
Posts: 334
Likes: 5
Axiom Engineer
devotee
Offline
Axiom Engineer
devotee
Joined: Dec 2001
Posts: 334
Likes: 5
Originally Posted By real80sman
On the pre-amp only, you will still be able to control the volume from the smart phone app, correct?


Yes, the software volume control still works from either your remote devices or our web interface.

Page 16 of 116 1 2 14 15 16 17 18 115 116

Moderated by  alan, Andrew, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,484
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 1,217 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4