Previous Thread
Next Thread
Print Thread
Rate Thread
hk 630 no output, any ideas ?
#66525 10/30/04 12:30 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
OP Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
Incident #1 -- came down in the morning, turned on the receiver (already set to FM), no output on the speakers. Turned on the TV -- normally shows the DVD player "screen saver" but just a blue (no input) screen. Volume control etc.. seemed to work fine, front panel responds to controls. Turning on OSD showed "OSD" on front panel but still blue screen on TV, just a brief "wiggle" in the image as if the video was being switched but no signal on either input.

Only other unusual thing was that I couldn't seem to switch surround modes. Figured maybe the DSP had hung up so switched off and unplugged for 5 minutes. Turned on and everyhing worked.

Next day, same problem except (a) I could switch surround modes OK, and (b) pulling the power cord didn't make any difference. I thought might be a strand shorting the speaker output but thought something lit up red when the amp went into shutdown. I pulled out most of the speaker wires (just left the mains), no effect.

Tried moving to another AC outlet; no difference. Next step is to pull & check the main wires and get some banana plugs so there is even less chance of a short, but I doubt that's gonna fix it. Any other ideas to try before I start thinking about repair/replace ?

Thanks,
JB


M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: hk 630 no output, any ideas ?
#66526 10/30/04 01:43 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
OP Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
Ewwwww... I forgot how bad the TV speakers sounded.

Pulled out all the speaker wires, no apparent loose strands. OSD still didn't work even with speakers disconnected. Hooked the mains back up, no sound. Next step is to wipe the memory on the receiver, I guess...

[EDIT] Wiping the memory didn't help either. Off to the dealer I go. Hmmm... less than 30 days since I bought it, maybe return instead ?


M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: hk 630 no output, any ideas ?
#66527 10/30/04 02:35 AM
Joined: May 2004
Posts: 1,201
connoisseur
Offline
connoisseur
Joined: May 2004
Posts: 1,201
Sorry to hear of your troubles, bridgman. I too have an hk,(230) but never experienced any problems(fingers crossed) since I bought it in febuary from the hk ebay store. You say you bought it from a dealer new? Try exchanging it for another. If not there are many other receivers recommended on this board. Good luck, richeydog.


*Michael*
AV123 Refugee - X-LS Encore, X-Voce, X-Omnis, Elt-Dpa's
Denon AVR-591
Magnavox NB500MGX BDP

Re: hk 630 no output, any ideas ?
#66528 10/31/04 01:38 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
OP Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
Thanks. Just got back from exchanging for a new one. The new receiver plugged in and worked fine. Back online again, don't think I could take listening to those TV speakers for much longer


M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,480
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 1,048 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4