Onkyo Receiver Settings
|
Joined: Apr 2005
Posts: 1,155
connoisseur
|
OP
connoisseur
Joined: Apr 2005
Posts: 1,155 |
Onkyo owners, I have an issue with my new Onkyo 703 that I am trying to resolve as to whether it is operator/ setup error or a faulty receiver. I have had this issue from the get-go.
The issue is that I have not been able to get my subwoofer to work using the subwoofer preout.
It should have been a fairly easy swap of the old Kenwood receiver for the new Onkyo. Just pull the cable out of the Kenwood and into the Onkyo.
Here is what I have checked so far:
1. Onkyo setup menu to insure that the subwoofer is turned on. In the Speaker Configuration, the subwoofer is shown to be on. I have tried turning it off and on a couple of times. I have tried various settings in the setup. In the level calibration, I have the subwoofer setting all the way up to +12dB, and nothing comes out of the subwoofer during the "pink noise" test. All of the other 5 speakers test OK.
2. I have checked the subwoofer cable with my multimeter. Everything checked out OK. Just to be sure, I used a different cable. Still nothing.
3. Read the setup and manual settings sections of the Onkyo receiver several times. Nothing of help in there.
It is a bit puzzling that when I turn the Onkyo on and off, I get a slight "thump" coming out of the subwoofer. This leads me to believe that there is an electrical path from the receiver to the subwoofer. Receiver just may not be sending any signals.
So, my question is: are there any "magical" setup settings that I ought to try before contacting Onkyo?
Any ideas?
The Rat.
M80s, VP-150, QS8s,
SVS PC 20-39+, OPPO,
Onkyo 703s, Harmony 880
Sony 60" SXRD HDTV
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Nov 2005
Posts: 27
hobbyist
|
hobbyist
Joined: Nov 2005
Posts: 27 |
ratpack, you’re going to make me confess to something stupid, not that this is what you did but it has all the same symptoms as my mistake. In my rush to setup my new toy I had the exact same problem as you, thump and all. I checked the manual, reconnected my sub with different cables, etc. I was getting a bit miffed. Finally I got mad enough that I pulled out my entire rack and spun it around directly into the day light so I could see what was wrong. Here comes the confession of stupidity, I had plugged my sub cable into the DVD sub which is almost directly under the preouts and both sub connections are purple. Needless to say, user error and I learned a good lesson, slow down and DO NOT use a flashlight to make audio connections, lol. Not necessarily stupidity just was a bit too excited in hooking up my new toy
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Jan 2005
Posts: 2,034
connoisseur
|
connoisseur
Joined: Jan 2005
Posts: 2,034 |
So I looked at the back of my 602, and wondered: How on Earth did I get lucky enough to NOT make the same error!?
And I was workin' in GOOD light!
I'll bet that happens in more cases than lots of folks will admit!
Rich.
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Dec 2003
Posts: 6,331
axiomite
|
axiomite
Joined: Dec 2003
Posts: 6,331 |
Abyss, as you can see, the DVD inputs on the 703 are just to the left of the preouts. I can see why it would be easy to hit the wrong subwoofer connection. I hope that this is indeed Rat's problem because the solution is so easy.
Jack
"People generally quarrel because they cannot argue." - G. K. Chesterton
|
|
|
Re: Onkyo Receiver Settings
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Bernard, we've been waiting breathlessly to learn if you're plugged in to the right output. If that isn't it, a question about check 2. : do you mean that you measured a voltage output at the end of the cable and that "nothing" referred to sub sound rather than voltage? If so, how much voltage?
A remote possibility is that the sub amp had a sudden failure. Check that by disconnecting one of your main speaker wires and temporarily connecting it to one of the sub's speaker level inputs to check for sound.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
Rat, come on man, your keeping us in suspense...
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Apr 2005
Posts: 1,155
connoisseur
|
OP
connoisseur
Joined: Apr 2005
Posts: 1,155 |
Abyss, F107, Ajax and John: I AM GOING TO MAKE YOUR DAY!!!
The very first thing that I checked when the subwoofer didn't work, was whether I put the cable in the correct preout. And, then I checked it another 5 times!
After reading your posts, I decided to check it again.
#$#@&^%$#@!
I had it in the DVD subwoofer connector!!!!!!!!!!!!!!!!
As many times as I looked at it, I missed that.
To get to the receiver, I have to get down low and look around from the left side. I completely missed seeing all the correct preouts with all of the speaker wires connected.
The woofer is woof'n just fine, now.
As I first posted, I thought that it just might be operator error. Geeeeezzzzzzzzz and it was!!!!
Thank you, Thank you, Thank you!!!!!!!!!!!!
The Rat.
M80s, VP-150, QS8s,
SVS PC 20-39+, OPPO,
Onkyo 703s, Harmony 880
Sony 60" SXRD HDTV
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Nov 2005
Posts: 27
hobbyist
|
hobbyist
Joined: Nov 2005
Posts: 27 |
LMAO, and it's not as bad as the 702. Here's a pic from the manual and I colored the subs purple, just like on the receiver itself. So my mistake was a bit easier than with the 703 but I'll let it slide
Link to pic
Sorry I have hotlinking enabled on my site, I have to link to the image.
Just had a feeling, it happens to the best of us, welcome to the club, lol.
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
This has got to be one of the best "Axiom Goofs" for 2006 so far. Give that guy an award...
Rat, I'm glad everything is working now..
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: Onkyo Receiver Settings
|
Joined: Apr 2005
Posts: 1,155
connoisseur
|
OP
connoisseur
Joined: Apr 2005
Posts: 1,155 |
Abyss: I have no excuses!!! I took my time, checked it, and then rechecked again. I used a flashlight too.
Have to admit it, I just screwed up.
The Rat.
M80s, VP-150, QS8s,
SVS PC 20-39+, OPPO,
Onkyo 703s, Harmony 880
Sony 60" SXRD HDTV
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
1,092
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|