If I set-up using balanced cables I can't make enough adjustments to level the sound dB's. This morning I did an experiment using RCA vs XLR These settings stayed the same throughout the test. My sub output in the Pre-pro was at 0 dB (no lower setting) I used auto set-up
Crossover Frequency 150 Volume / Gain EP-500 6 O'clock EP-800 9 O'clock
Started with the RCA cables FL +0.5 dB FR +1.0 dB C -0.5 SL -1.5 SR -3.0 EP-500 -2.5 EP-800 +1.0
Next the XLR cables not changing any settings FL +0.5 FR +1.0 C -0.5 SL -1.5 SR -3.0 EP-500 -12.0 EP-800 +12.0
So my dilemma is, in order to even out my sub I either have to lower the output in the pre-pro ( can't it's at the minimum ), Increase the vol / gain on the EP-800 ( can't increase it enough to come close to the EP-500 ), decrease the gain in the EP-500 ( can't same reason as above ) I'm now wondering if the XLR connection on the EP-500 is faulty? I tried to adjust the gain on the back and it was either very low level or when I moved it slightly to increase the gain it would go to max sound level ( no gradual increase, all or nothing ). So if anyone is still awake that's my problem. Brent from Axiom is looking into it. Mel N.