Ok, my dad gave me his 30year old Chief Pool Table. We disassembled it and moved it to my place this past Saturday. Still looks like new. Dang that 7/8" thick slate is heavy.
Anyway, as you know if you've worked with 3-piece slate tables, you sometimes have a very small seam where the slate pieces go together. It sounds like the best method for filling them is to use beeswax and heat with a torch. Once soft enough you press the wax into the crack. After it hardens, you can take a putty knife and scrape flat the excess.
I don't have a torch or beeswax, so was wondering if something else could be used. The cracks are very very small, so most likely you would not know the difference. I just want to do it right before I attach the felt.
