Man I wish Tom wasn't so obsessed with the piece's height. The long runs from PCB headers to the speaker terminals and input board sucks and you can't help but wonder about EMI/RFI on those and proper RCA jacks could have been used if it was made taller. Owh and no weird power plug on the bottom. Also looking at the preamp board it seems it has a series of through-holes unused (4pin header) and the ones that are (16 pin header) seem to have the pin header soldered in place that would put the header pins on the back of the PCB. I guess that's how the pre opamps connect to the amp boards? Some of the pins on that 16 pin header don't look like there is enough solder man. I haven't opened the thing up yet just using a flashlight and looking in there. I'm scared of opening the thing as I've never worked with any electronics with caps that HUGE. I'd be scared to bleed the thing. I can imagine the crack discharging them!
Solid-State
