John, you are correct. The Audyssey folks have long said you should never reduce the crossover setting for a particular speaker from which the setup process found. Bumping things up the other direction is ok, but not required.

Potato, above if your talking about the sub crossover setting you have at 100hz in the receiver, this is misleading. Even the Audyssey folks wish receiver manufacturers would not put this in as an option. This is actually a "low pass filter" and should be set to a higher setting or 120hz, not lower.

M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85