[/quote]
Ok the M100 are 47.5x9.25x17
the M80's are 39.5 x 9.25 x 17.
the EP400 13.5 x 10.5 x 16.8
I say here's a project for Andrew.
Take a M100 cabinet increase the size by wider. delete the bottom woofer.
throw in a 8" EP400 driver, decrease the watts to say 250w. the cabinet box would be practically the same size as the area of the EP400. It also, doesn't need to drop to 18hz something in the area of 27hz and at 85db then it can drop off.
It would be a hybrid system, run in full range, not LFE.
it would have the internal three way cross over except a filter to allow the 6.5" to smooth out, the filter would pick up around the 80 hz area and go to the internal sub amp
Strictly for music these would be.
I say here's a project for Andrew.
Take a M100 cabinet increase the size to the width of the EP400 box.
throw in a 8" EP400 driver, decrease the watts to say 250w. The cabinet box would be practically the same size as the area of the EP400. It also, doesn't need to drop to 18hz, something in the area of 27hz and at a level of 85db then it can drop off.
It would be a hybrid system, run in full range, no LFE.
it would have the internal three way cross over, except filtered to allow the 6.5" to smooth out the frequency , the subfilter would pick up around the 80 hz area and go to the internal sub amp.
Put a fancy typeset and call these Axiom Triton
