So if the rear of the LFRs are running around 10 ohms and the front around 4 ohms you would need 2.5 times the power to the front (10/4). An ADA1000 for the rear at 250 watts and an ADA1500 for the front at 650 watts works out pretty well.
So this is where we get into the dumb questions - if the rear is running 8-10 ohms then doesn't that reduce the power available from an ADA-1000 to 125W from 250W (presumably a function of rail voltage) ?
Last edited by bridgman; 05/10/17 06:13 PM.
M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
| 
