Two subwoofers
|
Joined: Dec 2004
Posts: 32
enthusiast
|
OP
enthusiast
Joined: Dec 2004
Posts: 32 |
How do you plug in two subwoofers if you only have one subwoofer input on your receiver. Can someone help me out with this? I have an HK AVR-7300 by the way, if that helps at all. Thanks folks.
|
|
|
Re: Two subwoofers
|
Joined: Feb 2005
Posts: 5,210
axiomite
|
axiomite
Joined: Feb 2005
Posts: 5,210 |
I believe you would use a 'Y' splitter on the sub's cable. You can buy the cables that are already split. That's how I had two subs connected to my system.
Here you go...
' Y-Connector
Connection that splits a single cable into two so that it may begin from one source with one connection and terminate in two connections on two components (or it may go the other way where two outputs are joined to the same input but this may not work if both outputs are sending information at the same time).
A Y-connector looks like the capital letter “Y” with the single end at the bottom connecting to the single cable and the split or branched V lines going out to the two connecting cables. Y-connectors are often used with multiple subwoofers when there is only one subwoofer output on a receiver or preamplifier. In such a situation, the output from the receiver or preamplifier attaches to the bottom of the “Y” while two more cables attach the upper branching lines. These two cables connect to the inputs of the two subwoofers so that both subs may be driven from a single output source connection.'
Last edited by BrotherBob; 09/02/05 07:15 PM.
|
|
|
Re: Two subwoofers
|
Joined: Jan 2005
Posts: 2,034
connoisseur
|
connoisseur
Joined: Jan 2005
Posts: 2,034 |
Some subs; depending on the amp, may have a line-in AND a line-out connector. If you have a line-out, you can sometimes just daisy chain the subs.
|
|
|
Re: Two subwoofers
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
I plan adding a second sub at some point and will use a Y Connector (splitter) to route to a second EP350, or a EP500 if I can talk the wife into it
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: Two subwoofers
|
Joined: Dec 2004
Posts: 32
enthusiast
|
OP
enthusiast
Joined: Dec 2004
Posts: 32 |
Thanks for the replies. I may try both and see what sounds better. I have a Martin logan Grotto Sub and I am pretty sure it has a line out. But for logistics it may just be easier to go with a y connector because I don't think i want the subs on the same wall. thanks again.
|
|
|
Re: Two subwoofers
|
Joined: Aug 2004
Posts: 6,379 Likes: 7
axiomite
|
axiomite
Joined: Aug 2004
Posts: 6,379 Likes: 7 |
I think a Y connector is the way to go. Many subs insert a high pass filter (ie remove the bass) between line in and line out; you don't want that
M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39 M5HP, M40ti, Sierra-1 LFR1100 active, ADA1500-4 and -8
|
|
|
Re: Two subwoofers
|
Joined: Jun 2003
Posts: 6,833
axiomite
|
axiomite
Joined: Jun 2003
Posts: 6,833 |
This would be a perfect application for an Outlaw ICBM.
Rick
"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud
|
|
|
Re: Two subwoofers
|
Joined: Jan 2005
Posts: 2,034
connoisseur
|
connoisseur
Joined: Jan 2005
Posts: 2,034 |
Yup...some do, and some don't.
That's why I said "sometimes".... My plate amp, for example has a high pass filter on the speaker level outputs and straight through on the line level. Dosen't seem very consistent does it?
|
|
|
Re: Two subwoofers
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Max, your Grotto does have an unfiltered line-level sub output which can feed a second sub. If you were going to locate the second sub very close(within about 1/4 wavelength)to the first one you'd get as much as an extra 3dB of reinforcement, for a total 6dB level increase with the second sub. The short cable that would be used in that case could run from sub to sub. If, on the other hand, you locate the subs in the middle of opposite walls(just the 3dB level increase)to partially nullify some room modes, as you indicate it would probably be more convenient to locate a y-connector at the receiver and run separate cables to each sub.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
Forums16
Topics24,945
Posts442,484
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
691
guests, and
4
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|