The ZP-1 is a pre-amp designed for a multi-zone system. It is available in 2, 4, 6, and 8 channels with a separate volume control for each set of channels and a master volume (the 2-channel only has the master volume).
The ZP-1 Zone Pre-amp is a great match for our ADA1250 and ADA1500 amplifiers for spaces that are large and you want a lot of shear output. It was originally designed for use in a bar or restaurant setting where you would want multiple channels throughout the room but at varying levels depending on their location and all controlled from a central location. But the ZP-1 can also work well for many home environments with a similar requirement.
There are three main inputs selectable from a switch on the front as well as a separate input for each set of channels if you desire to have different sources playing in different zones. This option is selectable using a toggle switch beside each volume control for each set of channels.
|Weight (lbs) each||29|
|Weight (kg) each||13|
|Dimensions H W D (inches)||3.5" x 17.75" x 16.75"|
|Dimensions H W D (mm)||89 x 450 x 425|
|Frequency Response (6 ohms -3dB)||18Hz - 65kHz|
|AC Input Voltage||115 or 230|
|RCA Input (Single Ended)||Yes|
|Signal to Noise Ratio (Input shorted, 22Hz-20kHz un-weighted, referenced to full power @8ohms)||100dB|
|12 Volt Trigger||-|
|XLR Input (Balanced)||-|
ZP1 Zone Pre-Amp
Base Price: $462.00