Speaking of setup, I just read this in the EP500/600 manual...
Quote:
Step 3:
CROSSOVER: if you are using the Bass Management crossover menu settings in your A/V receiver or processor, turn this control to “BYPASS” to eliminate the EP500 or EP600 internal crossover from the circuit.
If you are using the HIGH LEVEL (Speaker Level) binding-post inputs, set the crossover switch to 80 Hz for initial setup. If you have floor-standing speakers (M50, M60, or M80), try a 60 Hz crossover frequency, for the M80 try 40 Hz. If your main speakers are bookshelf models M3 or M22, try the 80 Hz setting, for the M2 try 100 Hz. Ultimately you want to use a crossover frequency that produces the smoothest blend of sound between the subwoofer and your main speakers.
Axiom is suggesting a crossover of 40 Hz for the M80s? Wouldn't the HIGH LEVEL binding post inputs produce the same result as using the AVR's internal crossover settings?
