Hi guys, some measurements:


The port on the Adagios is on the Front of the speaker, 4" from the ground, 2 1/2" high and 7 " wide (rectangle port) No ports in the back. Transmission line design.

The speaker is 48" tall (49" with the plinth and spikes), 13 1/2" deep, 9" wide at the front then tapers down to 4 1/2" in the back. Similar to the M80s tappered cabinet design.

The first 6 1/2 driver is 31 1/2" (center of cone)from the floor.

Next is the tweeter which is 38" from the floor (center of cone)

Then the other 6 1/2 driver which is 45 1/2" from the floor (center of cone)

Measurements from wall surfaces are taken from the walls to the center of the speaker cabinet.

Right speaker is: 26 1/2" from back wall and 23 1/2 from side wall.

Left speaker is: 26 1/2" from back wall and 9 ft from side wall.

Now, I'm going to move some furniture / chairs and see what I can come up with. Will report later the afternoon on my findings.
Cheers




Last edited by Riker; 09/16/10 05:30 PM.

Acoustic Zen Adagio, Veritas center, Axiom EP500, QS8s, Anthem AVM20, MC20,Adcom GFA7400