The 600 is not on the same power outlet, but is on an outlet that is 10ft from the receiver outlet, and they are wired togethor. I don't get the noise then. It is only when I plug the other subs to the 600's Line Out Coax. I don't even think they have to be plugged in, but I'll have to test that again another night.

I would I plug everything into one outlet, an outlet only has 2 ports (or whatever you want to call them). In my AV closet I have 2 outlets side by side in a Box that accomodates 2 outlets for a total of 4 plugs. Between my Tripplitte surge protector, Odyssey amps, and HTPC,, they are all taken up.

If Outlets are wired side by side, how is that any different than outlets that are wired the same way but have longer runs of 12-2 wiring? How can a person plug everything into 1 outlet, if subs are clear across the room?

I've tested all my outlets with a tester and it shows wiring is correct.

M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85