Hi Captain,
Oops. Failing memory. . .you're absolutely correct. It was Paul Paray who led the Detroit Symphony. I'll have to find that old LP and check it to see which version I have.
To check the tweeter connections (check the two midranges while you're at it), just undo the four Allen screws for each driver on the front baffle, and carefully remove the driver. The connections are push-on, so make certain they're firm. Tighten them with needle-nose pliers if necessary.
Re-install the drivers and don't overtighten the Allen screws--snug is sufficient.
Sometimes rough handling in shipping can loosen the push-on connectors. We'd use soldered connections but that would defeat the self-servicing and easy driver replacement which the push-ons enable. Besides, learning to solder well and avoid cold connections takes some skill and time to acquire.
Regards,
Alan
