I’m not saying it’s good or bad. Audysey thinks that is what’s needed to produce a “like” FR from all speakers according to your particular room acoustics.

Why not try a manual setting? It can’t hurt anything as you can always revert back to the auto settings.

Just go into the manual set up, select “copy curve” and it will take you to the next screen where you can then raise / lower all nine bands at will. After you play with them, just toggle between your manual settings and the Audysey settings. I would start out with adjusting the mains first. Just take it in small steps so you can track the changes and see / hear the differences.

I found that with the Audesey settings, I felt as if the mid range was lacking. I bumped up the mains in the mid range and couldn’t be happier. That may be all you need to do.