The Yammie has been tested and achieved 114W into 8 Ohms and 160W into 4 Ohms. So yes, it will work.

It has very good noise performance...but only in Pure Direct. If you want to use YPAO for "room correction", you cannot use Pure Direct and noise performance will be bottom of the barrel. My late 80s vintage Yammie was no different in this regard and at 1/3 volume, I could hear the difference between Direct and not.

So it will work but is perhaps not so performant if you want to use YPAO or bass and treble EQ.

House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated