Hi rrlev,
An ADA1500-5 per speaker would work really well. Since there is one DSP per speaker the amp/DSP combo can be over by each speaker. I did think about putting the DSP and an ADA1500-5 in the speaker. It would save a lot of wiring as you would just need to plug each speaker into the wall. Our 4in1 Transmitter/pre-amp/AxiomAir could send the information to each speaker wirelessly.
But the speaker would have to get quite a bit taller to house all this amplification and the DSP. As it is you could still use the 4in1 Transmitter/pre-amp/AxiomAir and have the receiver mounted in the DSP for each speaker so the wiring would be minimal, just 5 short speaker wires if the amp is near the speaker and the interconnects from the DSP to the amp.
