Hi Timmeh,

It sounds like your AxiomAir is about half way through the process. With your AxiomAir plugged into your router with an Ethernet cable you should be able to get to the UI through File Explorer on your PC. Click on Network on the left side, then on the right side your AxiomAir should be under Media Devices, double click on it to open the UI. Click the gear then under System you can check that you are on v2.08. If you are then plug only your WiFi dongle into the USB port on your on your AxiomAir, then click on Delete User Data and Yes to reboot. Wait for 10 minutes and then go to the gear and Network and put your AxiomAir back on your network. Now you should be able to remove the Ethernet cable and reboot your AxiomAir.

Ian Colquhoun
President & Chief Engineer