OK. So I spent a couple of hours in the basement, but only about 1 of those was in the theater. I did some painting elsewhere, as well as getting some measurements for things like tile in the bathroom, etc. So anyway, I basically got the 2nd layer of 3/4" plywood on the riser and the two layers of 3/4" plywood on the steps of the riser. This puts it to 11" tall before carpet. That should be nice for seeing over heads.

Anyway, I never got a chance to use the router to round over the lip around the riser and riser steps, and thus I didn't clean the room up for pictures. But, I promised something, so here is a picture of the riser...




Farewell - June 4, 2020