So I ran out of Bondo. I originally (before I was going to do the groove method on the seams) had a 1 pint can. I scrapped that idea and went with a 1 quart can instead. Well, I should have gotten the gallon size. I went through the full quart and still have about 1/2 of the box to cover (some grooves and whole surface). The pint costs about $6, the quart was about $9, and the gallon was $19. Lesson learned there.

I was also fighting the high humidity outside contrasting the blaring sun. The sun was drying things so fast, at least to a point, and then the humidity slowed down the last bit of drying. After the fumes settle down I will bring it back into the house so that it isn't fighting the humidity.

Farewell - June 4, 2020