So I *FINALLY* got around to ordering my custom fabric for my acoustical panels. I looked back and I started with some of the first rough designs of things back in June... Took long enough.

I only had time to put the fabric on one panel tonight as we are heading out of town early in the morning, but here are some pictures.

Rear wall's panel (25.5" tall x 48.25" wide x 5.5" deep) using 4" thick OC703 plus a 1.5" air gap behind it.



And with the fabric...



The side panels will mimic the metal artwork that will eventually go in the wet bar area right outside the theater.


Farewell - June 4, 2020